.jpg)
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Hygiena Protein Residue Test 每 PRO-Clean
| Previous | 1 / 2 | Next |
Protein Residue Test
PRO-Clean™ is the easiest and most accurate way to verify the cleanliness of food equipment surfaces. Simply swab a surface and release the reagent. If protein residue is present, the reagent will turn purple - the more contamination, the quicker the color changes and the darker it becomes. PRO-Clean instantly validates surface hygiene, allowing immediate corrective action to be taken when necessary.
No interpretation required.
The results couldn't be easier to read. If protein is present in a sample, the reagent in the device will turn purple for immediate verification that is simple for any user to understand without interpretation or instrumentation. To learn more, watch the video above.
Reliable and accurate changeover cleaning verification.
Why test for protein residue? Protein is more difficult to remove from surfaces than glucose or other residues, so it's a good indicator for surface contamination. If you need to verify protein removal quickly, PRO-Clean is reliable and accurate.
Benefits
- Results in 1-10 minutes depending on sensitivity required - Instant results allow for immediate corrective action
- Easy-to-interpret color change
- All-in-one device- no instrumentation required
- Quick and easy way to monitor HACCP/SSOP program
- Cost effective
- No training required
Specifications
- 80 µg after 1 minute
- 50 µg after 5 minutes
- 20 µg after 10 minutes
- Patented Snap-Valve™ technology - snap & squeeze
- Pre-moistened swab bud
- Write-on swab tube label
-
Shelf life:
- 18 months at room or refrigerated temperatures (2 - 25°C)
Catalog Number
| Catalog No. | Description | Quantity |
| PRO-100 | PRO-Clean Protein Residue Test | 100 |
Related Products
Resources
Brochure
Instructions
Safety Data Sheet (SDS)
Technical Documents
- Rapid Colorimetric Surface Protein Test: Determination of the Limit of Detection for PRO-Clean at Incubated Temperatures
- Effect of Cleaning Chemicals/Disinfectants on PRO-Clean
- Environmental Monitoring Self Assessment - FSMA Prep
Video Demo
