Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
+603-2742 7469

Testo 410-1 - Vane Anemometer [Delivery: 3-5 days]

Previous 9 / 24 Next

Testo 410-1 - Vane Anemometer [Delivery: 3-5 days] Air Flow Pressure / Air Flow / Manifolds / Gas Detectors Testo
RM 460.00
180 g
In Stock


testo 410-1 - Vane Anemometer
 
  • Vane anemometer with permanently installed 40 mm vane
  • Measurement of air velocity and air temperature
  • Calculates wind chill and the Beaufort wind force
  • Practical: with single-point averaging, max/min and Hold function
The testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force.
 
 
Product Description
 
The testo 410-1 vane anemometer is impressive thanks to its practical pocket size and is ideal for fast check measurements. With a measuring range of 0.4 to 20 m/s, the anemometer can even be used for low flow speeds.
 
The anemometer has a permanently mounted vane with a diameter of 40 mm. You can therefore use it for the integral measurement of air velocity at ventilation grilles (air outlets).
 
The anemometer is practical for outdoor operation: as well as air velocity and air temperature, the testo 410-1 also calculates the Beaufort wind force and the wind chill temperature, which is the temperature perceived by a person due to wind-related cooling.
 

The vane anemometer with practical functions
 
The testo 410-1 includes a plug-on protective cap, as well as a wrist strap for secure measurement, and enables you to take advantage of the following functions:

  • Single-point averaging: provides information on the average air velocity, e.g. at air outlets
  • Hold function: is used to record the current values relating to air velocity and air temperature and compare them with each other
  • Max/min values: get the minimum or maximum values since the anemometer was last switched on or reset, at the touch of a button
  • Illuminated display: read off your readings even in dark environments
  • Selectable units: for air velocity and temperature: m/s, km/h, fpm, mph, kts, Beaufort, °C, °F and wind chill
 
 
Delivery Scope
 
testo 410-1 vane anemometer for measuring air velocity and air temperature, including protective cap, wrist strap, calibration protocol and batteries.
 
 
Technical Data
 

Temperature - NTC
Measuring range -10 to +50 °C
Accuracy ±0.5 °C
Resolution 0.1 °C
Measuring rate 0.5 s
 
Velocity - Vane anemometer
Measuring range 0.4 to 20 m/s
Accuracy ±(0.2 m/s + 2 % of mv)
Resolution 0.1 m/s
 
General technical data
Dimensions 133 x 46 x 25 mm (incl. protective cap)
Operating temperature -10 to +50 °C
Protection class IP10
Warranty 2 years
Battery type 2 AAA micro batteries
Battery life 100 h (average, without display illumination)
Storage temperature -20 to +70 °C
Weight 110 g (with protective cap and batteries)
 
 
Downloads
 
Product Brochures

Product brochure testo 410  (PDF, 248.9 kB)
 
Manuals

Instruction manual testo 410-1  (PDF, 242.1 kB)
 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in