Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
+603-2742 7469

Testo 417 - Air Flow Meter [Delivery: 3-5 days subject to availability]

Previous 10 / 24 Next

Testo 417 - Air Flow Meter [Delivery: 3-5 days subject to availability] Air Flow Pressure / Air Flow / Manifolds / Gas Detectors Testo
RM 1,599.00
390 g
In Stock


testo 417 - Air Flow Meter
 
  • Compact anemometer with integrated 100 mm vane
  • For measuring air flow, volumetric flow rate and temperature
  • Ideal for carrying out measurements at air inlets and outlets
  • For carrying out measurements at disk valves, ventilation grilles and ceiling diffusers using optionally available accessories
The testo 417 vane anemometer allows you to carry out quick and precise measurements at air inlets and outlets. The easy-to-read display shows air flow speed and direction as well as volumetric flow rate and temperature. The meter can also calculate the mean time value, average value and minimum and maximum value at the touch of a key.
 
 
Product Description
 
The testo 417 vane anemometer allows you to measure air flow speed, volumetric flow rate and temperature simultaneously. The integrated vane makes it ideal for carrying out measurements at air inlets and outlets. 
The optionally available testovent 417 funnel set allows you to carry out measurements at ventilation grilles and disk valves. There is also an air flow rate rectifier for carrying out quick and reliable measurements at diffusers.
 
 
The vane anemometer is designed to provide you with the following values
 
The easy-to-read display shows all important data including air flow direction – ie. whether the air is being sucked in or blown out – air flow speed and the volumetric flow rate as well as the actual temperature.

The mean time value and average value provide you with information regarding the average volumetric flow rate, air flow speed and the temperature measurement. In order to carry out the volumetric flow rate simply enter the area of the duct or use the optionally available funnel set.   

In addition, there is also a hold function which allows you to compare the measurement you have just take with previous measurements. Min and max values are also available at the touch of a key. And thanks to the testo 417’s backlit display you can read the measurements in the dark or in poor lighting.
 
 
Delivery Scope
 
testo 417 vane anemometer with integrated 100 mm vane, calibration protocol, battery.
 
 
Technical Data
 

Temperature - NTC
Measuring range 0 to +50 °C
Accuracy ±0.5 °C
Resolution 0.1 °C
 
Velocity - Vane anemometer
Measuring range +0.3 to +20 m/s
Accuracy ±(0.1 m/s + 1.5 % of mv)
Resolution 0.01 m/s
 
Volume flow
Measuring range 0 to +99999 m³/h
Resolution 0.1 m³/h (0 to +99.9 m³/h)
1 m³/h (+100 to +99999 m³/h)
 
General technical data
Dimensions 277 x 105 x 45 mm
Operating temperature 0 to +50 °C
Housing ABS
Warranty 2 years
Battery type 9V block battery, 6F22
Battery life 50 h
Storage temperature -40 to +70 °C
Weight 230 g
 
 
Applications
 
Measurement of volumetric flow, flow velocity and temperature
 
Every duct inlet and outlet should only contain the volumetric flow that according to calculations is a basic prerequisite to an efficient functional system. 
 
Particularly large vane anemometers are suitable for measuring the volumetric flows at duct outlets, as these integrate the flow velocity over a larger area thereby determining disturbance from the air grille (loop method). 
 
A volumetric flow rate funnel and a large vane are ideal when taking readings at the suction or blowing vents of air grilles and poppet valves. The entire volumetric flow is recorded with the aid of the funnel without the need for conversion on the basis of the flow velocity and area. This method of flow measurement is simple and reliable.
 
The compact anemometer testo 417 with integrated flow/temperature vane (Ø 100 mm) is ideal for measuring the flow velocity, volumetric flow and temperature at duct outlets. The optional funnel set allows measurements at ventilation grilles and poppet valves.
 
 
 
Downloads
 
Product Brochures

Product brochure testo 417  (PDF, 294.2 kB)
Example application measurement of volume flow at swirl outlets  (PDF, 1.200 KB)
 
Manuals

Application information testovent 417 - de/en/fr/es/it/pt  (PDF, 514.4 kB)
 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in