Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Atago RX-5000¦Á-Bev | Automatic Digital Refractometer [Code 3271]
Previous | 2 / 6 | Next |
Automatic Digital Refractometer RX-5000α-Bev
Calibration with water | |
Digital display | |
AC outlet (AC100 to 240V) | |
Automatic Temperature Compensation | |
RS-232C Interface | |
User scales can be inputted | |
Can be connected to a printer | |
Measurement at a set temperature | |
Refractive index scale |
- The NEW RX-5000α-Bev is a re-designed version of the conventional RX-5000α. A flat sample stage replaced the sample well to make it easier to wipe off the sample and to allow for a faster and easier clean up. The RX-5000α-Bev is ideal for measuring beverages and is equipped with all the standard features of the RX-5000α.
- This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase.
- FDA 21 CFR Part 11 Software Included in Standard Delivery.
Specifications
Model | RX-5000α-Bev |
Cat.No. | 3271 |
Scale |
Refractive index Brix |
Measurement Range |
Refractive index (nD) : 1.32700 to 1.58000 Brix : 0.000 to 100.00% (5 to 60°C ATC) |
Resolution |
Refractive index (nD) : 0.00001 Brix : 0.01% Temperature: 0.01°C |
Measurement Accuracy |
Refractive index (nD) : ±0.00004 Brix : ±0.03% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C |
Repeatability |
Refractive index (nD) : ±0.00002 Brix : ±0.01% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C |
Temperature control range |
5.00 to 60.00°C (Lowest is ambient temp -10°C) |
Measurement Temperature | 5 to 60°C |
Power Supply | AC100V to 240V, 50/60Hz |
Included Accessories | Software, PolariSoft |
Dimensions & Weight |
37×26×14cm, 6.1kg (Main Unit only) |
Power consumption | 65VA |
Mode |
MODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. |
Output terminals |
• Printer (for ATAGO digital printers) • Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter (optional) |
Warranty | 2 years standard (3 years with product registration) |
Options
- Digital Printer DP-RX (Thermal printer) : Cat.No.3121
- Digital printer DP-RD (Dot matrix printer) : Cat.No.3122
- 10% High Accuracy Sucrose (±0.01%) : RE-111001
- 20% High Accuracy Sucrose (±0.01%) : RE-112001
- 30% High Accuracy Sucrose (±0.01%) : RE-113001
- 40% High Accuracy Sucrose (±0.02%) : RE-114002
- 50% High Accuracy Sucrose (±0.02%) : RE-115002
Parts
- Cover plate : RE-65159
- Printer paper (regular) for Thermal printer : RE-8412
- Printer paper (long-term storage) for Thermal printer : RE-8414
- Printer paper for Dot matrix printer : RE-89403
- Ribbon cassette : RE-89402
- Fan Filter Replacement : RE-58001
Catalog Download (1.54MB)
"The World's Highest Standard of Technology Stemming from Over Half a Century of Expertise"
Features
World's Highest Standard of Accuracy
The RX series are the most accurate of ATAGO refractometers programmed with a trusted and advanced algorithm. The epitome of which boasts the accuracy of ±0.000010 nD and ±0.005% Brix.
Main Features
- Visual "Pass/Fail" Indication
- Programmable User Scale
- Password Security
FDA 21 CFR Part 11
Software is available to support your FDA 21 CFR Part 11 compliance.
Ergonomically Designed Layout
The RX- a series was designed with ease of use in mind. Extensive research was performed in the design phase to ensure an ergonomic interface that made operation easy while maximizing efficiency.
4 Measurement Mode Options
MODE-1: For maximum accuracy
Displays the measurement value once the sample reaches the target temperature.
MODE-3: For no temperature control
Provides an option to turn the thermo-module off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.
MODE-2: For fast results
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.
MODE-S: For emulsion samples
Displays the measurement value once a certain level of sample stability is achieved.
Please click the image below:
Tried, tested, and proven features and design
Application Examples
Refractive Index
Refractive Index is a common quality standard measure for pharmaceutical or chemical products. Measurements need to be taken at a constant temperature, commonly 20°C, 25°C, and 40°C. The RX-α units are equipped with the internal Peltier Thermo-Module, and measurement starts once the target temperature is reached.
Fragrance and Food Additives | Pharmaceutical Products | Cosmetics |
Petroleum and Organic Solutions | Oils and Fats | Detergents |
Brix
Brix is measured for quality control purposes in the food and beverage industries. The RX-α units are widely used for fruit juice, condiments, jams, and honey. The RX-007α (minimum indication 0.001% Brix) is used for tea and unsweetened drinks.
Beverages and Fruit Juice | Jams, Honey, Liquid Sugar, Syrups | Condiments, Sauces, Soups |
Concentrations
The concentrations of industrial solutions are often monitored. Examples include water-based cutting oils and cleaning solutions, hydrogen peroxide, coolants, and alcohol solutions. Although the Brix scale is commonly used, user scales can also be programmed to display converted sample values.
Chemical Solutions | Cutting Oil and Quenching Oil | Antifreeze and Coolants |
Digital Refractometers RX-α series Measurement Method
4 easy steps:
1. Place a sample on the prism. | 2. Press the START key to start a measurement. | 3. Measurement value is displayed. | 4. Wipe off the sample to clean. |