.jpg)
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
2046S Dial Indicator with Lug
SKU: 2046S
Mitutoyo 2046S Dial Indicator
SERIES 2 - Standard Type, 0.01mm Graduation
SERIES 2 - Standard Type, 0.01mm Graduation
Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Features
- Standard 0.01mm graduation dial gages having a bezel with an outside diameter of 57mm. All types come with limit markers and a bezel clamp as standard.
- The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
- Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
- The spindle is made of high-strength quench- hardened stainless steel suitable for heavy- duty use. A carbide contact point is used.
- The grand gear is made of stainless steel with high resistance to wear and deformation. Application of a hard coating on the surface of the crystal makes the gage highly scratch- and chemical-resistant.
Dimensions
| Order No. | A | B | C | D | E | F | G | H | I |
| 2046S | 48.8 | 65.2 | 57 | 17.7 | 20 | 16.9 | 19.8 | 52 | 7.6 |
Specifications
| Order No. | 2046S | |
| Graduation | 0.01mm | |
| Range (range/rev) | 10mm (1mm) | |
| Accuracy | Overall | 13μm |
| Retrace | 3μm | |
| 1/10 Rev | 5μm | |
| 1 Rev | 10μm | |
| Repeat- ability | 3μm | |
| Dial reading | ±0-100 | |
| Measuring force | 1.4N or less | |
| Remarks | w/ lug | |
Downloads
