Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
+603-2742 7468

Schaller humimeter RH2 | Water Activity Meter

Schaller humimeter RH2 | Water Activity Meter Foods Schaller Schaller humimeter RH2 | Water Activity Meter Foods Schaller Schaller humimeter RH2 | Water Activity Meter Foods Schaller Schaller humimeter RH2 | Water Activity Meter Foods Schaller Schaller humimeter RH2 | Water Activity Meter Foods Schaller

Schaller humimeter RH2 | Water Activity Meter / Analyzer

Portable laboratory instrument for determination of water activity (aw value) of food with datalog function.

Suitable for measuring materials like butter, fruit mix, spices, granulate, mushrooms, xylit, flour, biscuits or sausage as well as all other food types requiring a check of the water activity value.

Furthermore, the humimeter RH2 is suited for measuring special material, e.g. plastic granulate or for climatic and environmental applications.

Not suited for juices (syrup), acidic food like vinegar or food and beverages containing alcohol. 



Measuring Range

0.03 to 0.98 activity of water


0.001 aw

Temperature range

0 to + 50°C, calibration +/- 0.5°C (at 25°C)

Measuring range of relative humidity

0 to 100% rh, resolution: 0.1% rh

Calibration 0.10 to 0.80 +/- 0.01 activity of water
0.00 to 0.10 and 0.80 to 0.98 +/- 0.04 aw (at 25°C)
Dew point -55°C to + 60°C, resolution 0.1°C, -67°F to 140°F
Absolute humidity 0 to 130 g/m³, resolution 0.1 g/m³
Equilibrium moisture content 2% to 30%, resolution 0.1%
  • Temperature can be set to °C or °F as required
  • Equilibrium moisture content synthetic granules resolution 0.01 %
  • User programmable characteristic curves for calculation of equilibrium moisture content
  • Online-function, Hold function, manual data memory
  • Automatic datalog for up to 10,000 logs with measuring point report
  • Supplier-Management
  • Menu languages: English, German, Italian, French, Spanish, Russian and many others on request
  • Scope of supply: humimeter RH2 with rubber protection cover and batteries
  • Optional: humimeter USB data interface module with LogMemorizer measuring data recording and analyzing software on USB flash drive incl. USB cable for PC and printer


  • Relative humidity, absolute humidity, dew point, equilibrium moisture content, aw-value
  • Long stable humidity sensor
  • Easy data storage at the portable moisture meter
  • Analysis on the PC and printer available
  • Optimal documentation of your quality

Water activity of food / handling of device

The water activity of products, especially of food, indicates the amount of unbound water in a material. This quality factor, also called aw value, depends on the water vapour pressure in the material, on the current temperature and on the water vapour pressure of the surroundings.

The humimeter RH2 water activity meter enables the quick and easy determination of the water activity. Furthermore, due to the large sample volume of the water activity measuring chamber, higher quantities can be measured within a short time. This enables a higher number of taken random samples.

The simple handling guarantees a cost-saving and faultless process of measuring the activity of water value of food. Just fill the material into the activity of water measuring chamber and close it.

After an appropriate conditioning time (time period until a constant climate in the chamber is reached = moisture equilibrium) the water activity can directly be read off the display of  the humimeter RH2 water activity meter.
The time period until reaching the moisture equilibrium strongly depends on the material to be measured as well as on the temperature. Hygroscopic materials like cornflakes assimilate in a considerably shorter time than whole maize grains. In this context it is important that the samples have the same temperature than the measuring instrument resp. the measuring chamber – high temperature differences lead to a longer conditioning time.

This conditioning time depending on the material is a physical phenomenon and cannot be shortened artificially.
Generally, the conditioning time ranges from 5 minutes to about an hour.
The moisture equilibrium is achieved when the displayed measuring value is no longer changing for a period of several minutes (e.g. 10 minutes, changes less than 0.002 aw).


Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in