.jpg)
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Surftest SJ-210 Portable Surface Roughness Tester
| Previous | 4 / 4 | Next |
SKU: 178-561-11E
Mitutoyo SJ-210 Surftest Portable Surface Roughness Tester
Standard drive unit, (0.75 mN type)
SKU: 178-561-11E
Standard drive unit, (0.75 mN type)
SKU: 178-561-11E
Performs brilliantly in many situations such as in the quality control room, on the factory floor and on the production line.
With the SJ-210 Series...
You can measure while checking roughness from the waveform!
With the SJ-210 Series...
You don't have to carry large, heavy workpieces because you can measure it on site!
Lightweight and compact, you can measure any side without trouble!
With the SJ-210 Series...
Anyone can measure skidded* measurements easily!*Measurement method where leveling of the measurement surface is simplified since displacement is measured relative to the ''skid'' that follows the workpiece surface.
Specifications
| Type of detector | Standard drive unit type | |||
| Model No. |
SJ-210 (0.75 mN type) |
|||
| Order No. | 178-561-11E | |||
| Measuring range | X axis | 16.0 mm | ||
| Z axis (Detector) | Range | 360 μm (-200 μm to +160 μm) | ||
| Range/ Resolution |
360 μm/0.02 μm 100 μm/0.006 μm 25 μm/0.002 μm |
|||
| Measuring speed |
When measuring: 0.25 mm/s, 0.5 mm/s, 0.75 mm/s When returning: 1 mm/s |
|||
| Measuring force/Stylus tip | 0.75 mN/2 μmR 60° | |||
| Skid force | 400 mN or less | |||
| Applicable standards | JIS ’82/JIS ’94/JIS ’01/ISO ’97/ANSI/VDA | |||
| Assessed profiles | Primary profile, Roughness profile, DF profile, Roughness profile-Motif | |||
| Parameters | Ra, Rc, Ry, Rz, Rq, Rt, Rmax*1 , Rp, Rv, R3z, Rsk, Rku, Rc, RPc, Rsm, Rz1max*2, S, HSC, RzJIS*3, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp*4, Htp*4, R, Rx, AR, Possible Customize | |||
| Graph analysis | Bearning area curve, Amplitude distribution curve | |||
| Filters | Gaussian, 2CR75, PC75 | |||
| Cut off length | λc | 0.08, 0.25, 0.8, 2.5 mm | ||
| λs*5 | 2.5, 8 μm | |||
| Sampling length | 0.08, 0.25, 0.8, 2.5 mm | |||
| Number of sampling lengths |
×1, ×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10, arbitrary length (0.3 to 16.0 mm: 0.01 mm interval) |
|||
| LCD dimensions | 36.7×48.9 mm | |||
| Display languages | Japanese, English, German, French, Italian, Spanish, Portuguese, Korean, Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian, Turkish, Swedish, Dutch | |||
| Measurement result display |
Vertical display: 1-parameter display/3-parameter display/Trace display Horizontal display: 1-parameter display/4-parameter display/Trace display (Horizontal display is invertible) |
|||
|
Printing function*6 (Dedicated printer is required separately) |
Measurement conditions/Calculation results/GO/NG judgement result/Calculation results for each sampling length/ Assessed profile/Bearing area curve/Amplitude distribution curve/Environment setting information | |||
| External I / O | USB I / F, Digimatic Output, Printer Output, RS-232C I / F, Foot SW I / F | |||
| Functions | Customization | Desired parameters can be selected for calculation and display | ||
| GO/NG judgment*7 | By max value/16 %/Standard deviation | |||
| Storage of measurement condition | Save the conditions at power OFF | |||
| Storage |
Internal memory: Measurement condition (10 sets) Memory card (optional): 500 measurement conditions, 10000 measured profiles, 500 display images Text file (Measurement conditions / Measured profile / Assessed profile / Bearing area curve / Amplitude distribution curve) |
|||
| Calibration |
Auto-calibration with the entry of numerical value / Average calibration with multiple measurement (Max. 5 times) is available |
|||
| Power-saving function | Auto-sleep off function (10-600 sec)*8 | |||
| Power supply |
Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter Note 1: Charging time: about 4 hours (may vary due to ambient temperature) Note 2: Endurance: about 1000 measurements (differs slightly due to use conditions / environment) |
|||
| Size (W×D×H) | Display unit | 52.1×65.8×160 mm (sliding cover closed, detector not mounted) | ||
| Drive unit | 115×23×26 mm (detector not mounted) | |||
| Mass | About 500 g (Display unit + Drive unit + Standard detector) | |||
| Standard accessories |
12BAA303 Connecting cable*9 178-601 Roughness specimen (Ra 3 μm) 12BAR344 Carrying case 12BAK700 Calibration stage Protective sheets for display, AC Adapter, Operation manual, Quick reference manual, Warranty |
|||
*2 Calculation is available only when selecting the ISO '97 standard.
*3 Calculation is available only when selecting the JIS '01 standard.
*4 Calculation is available only when selecting the ANSI standard.
*5 Not available when selecting the JIS '82 standard.
*6 Order the SJ-210 printer (178-421, optional accessory) separately.
*7 Standard deviation only can be selected in ANSI. 16 % rule cannot be selected in VDA.
*8 Auto-sleep function is invalid when AC adaptor is used.
*9 For connecting the calculation display unit and drive unit.
Note 1: Refer to pages 18 to 19 for details about consumables and options.
Note 2: To denote your AC line voltage add the following suffixes (e.g. 178-560-11A).
A for 120 V, C for 100 V, D for 230 V, E for 230 V (for UK), DC for 220 V (for China), K for 220 V (for Korea)
Downloads
Demo Video
