.jpg)
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
CTT-200 Torque Tester | Alluris by Muser
| Previous | 2 / 3 | Next |
Alluris CTT-200 Torque Tester
Features
- High accuracy with 0,5 % >> precise peak value detection with 1000 Hz.
- Exchangeable centering base plate >> robust, stable and protected against dripping water (IP42).
- Limit value monitoring >> with pass /fail detection for peak values.
- Internal solar cell >> allows operating the instrument without external power supply.
Description
Digital Cap Torque Tester CTT-200 series are particularly suitable as test tools for fast manual torque testing of screw caps, valves, machine components or tools. Objects to be tested (25 - 180 mm diameter) are centrally positioned with retaining bolts and clamped by a contrarotating spindle mounted in the turntable. By manually rotating the test object, the force is transmitted to the torque sensor.
The device has an internal memory with statistic function and an USB interface. Using the software FMI_Analyze torque curves can be visualized and limits are monitored via PC.
The housing complies with protection code IP42 and the torque sensor is protected against overload up to max. ± 20 Nm. With its compact design, the system is designed for desktop application. It may be screwed on table tops (maximum thickness 30 mm) to protect against slipping.
The device has an internal memory with statistic function and an USB interface. Using the software FMI_Analyze torque curves can be visualized and limits are monitored via PC.
The housing complies with protection code IP42 and the torque sensor is protected against overload up to max. ± 20 Nm. With its compact design, the system is designed for desktop application. It may be screwed on table tops (maximum thickness 30 mm) to protect against slipping.
Technical Specifications
| Order No. | ||||
| CTT-200B2 | CTT-200B5 | CTT-200C1 | ||
| Measuring range | M(n) | 0-2 Nm | 0-5 Nm | 0-10 Nm |
| Resolution | Res(n) | 0.002 Nm | 0.005 Nm | 0.01 Nm |
| Accuracy | @ 23 °C (F.S.) | +/- 0.5 % (+/- 1 digit) | ||
| Tk [offset] | Automatic taring (Auto-Tara) | |||
| Tk [relative (F.S.)] | +/- 0.02 %/K | |||
| Measuring principle | Bidirectional strain gauge with high-speed μ-Prozessor | |||
| Operation modes | Standard | Real time value | ||
| Peak | Torque peak (drag indicator function) | |||
| Limit values | Limit value monitoring with upper and lower limit | |||
| Overload | Max. admissible | ± 20 Nm | ||
| Max. display range | 120 % (max. Tara 20 % of M(n)) | |||
| Display | Type | LCD, 5-digit, 29 mm high | Status-LED switching between red/green | ||
| Interfaces | USB | USB 2.0 data communication and power supply | ||
| Hirose | Limits/switch signals, digital I/Os, trigger, power supply for external devices (requires optional cable) | |||
| Software | FMI-Analyze | Data analysis on PC | ||
| COM-Bridge | Data transmission (e. g. to CAQ-Software) | |||
| Memory | Single values | Up to 1000 measuring values | Statistic function | ||
| Power supply | Internal solar-cell with storage capacitor | via USB | |||
| Temperature range | Operation | 0…40 ˚C | ||
|
Housing |
Weight | ca. 5000 g | ||
| LxWxH | 280x170x95.3 mm | |||
| Fixation |
On tabletops up to 30 mm depth (two holes with threaded bolts and lock nuts on the bottom) |
|||
| Max. clamping range | Ø 25 - 180 mm | |||
| Protection code | (without cable) | IP42 (Protection against dripping water up to 15° tilt devices) | ||
Downloads
