.jpg)
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
FMI-M10 Force Gauge | Alluris by Muser
| Previous | 10 / 11 | Next |
Alluris FMI-M10 Force Gauge
Features
- Spring scale with Newton scale for easy tensile force measurement
- Robust, anodized and abrasion-free aluminum tube with a long precision scale
- Determination of peak values with towing ring
- Optional pressure set for pressure force measurement
Description
In a mechanical force gauge, a spring is stretched by the applied force and the change in length (about 140mm at maximum force) is displayed on a precision scale in the SI dimension Newton. The main advantage of this measuring method is the simple application. With this measuring principle, peak values, e.g. determine of closing/opening forces or tensile tests can be made easily.
The peak value (max. pull) is displayed by means of a tow ring.
Attention! When choosing a mechanical force gauge, be aware that the sudden change of load, e.g. if the material to be tested breaks, does not exceed 40% of the maximum force value.
The optional push rod set extends the application possibilities.
The peak value (max. pull) is displayed by means of a tow ring.
Attention! When choosing a mechanical force gauge, be aware that the sudden change of load, e.g. if the material to be tested breaks, does not exceed 40% of the maximum force value.
The optional push rod set extends the application possibilities.
Technical Specifications
| Order No. | |||||||||
| FMI-M10A3 | FMI-M10A6 | FMI-M10B1 | FMI-M10B2 | FMI-M10B5 | FMI-M10C1 | FMI-M10C2 | FMI-M10C5 | ||
| Capacity F(nom)* | N | 3 | 6 | 10 | 25 | 50 | 100 | 200 | 500 |
| Resolution** | N | 0.02 | 0.05 | 0.1 | 0.2 | 0.5 | 1 | 2 | 5 |
| Tolerance** | % F(nom) | 3 | |||||||
| Temperature coefficient* | %/ K | 0.05 | |||||||
| Reproducibility* | %F | 0.6 | |||||||
| Repeatability* | %F | 0.6 | |||||||
| Hysteresis* | %F | 1.5 | |||||||
| Measuring principle | Tension spring with direct scaling | ||||||||
| Nominal deflection* | mm | 100 | 140 | ||||||
| Application of force | Bracket and tow hook | ||||||||
| Accessories | Drag ring | included | |||||||
| Handle | included | ||||||||
| Push rod (optional) | FMT-918 | FMT-917 | |||||||
| Calibration Certificate | ISO 9001 certified | CAL-100B1Z | |||||||
| ISO 17025 accredited | CAL-210B5Z | CAL-210K1Z | |||||||
*) according VDI/VDE/DKD 2638 at 0,2 ...1 x F(nom)
** ) according DIN 1319-1
Scope of Supply
- Spring balance with draw hook and instruction manual in protective cover. Print set and calibration certificate optionally available.
- Attention! When selecting the measuring range, please note that spring scales may be used up to a maximum of 40% of the nominal force range in the event of a tear or fracture test.
Downloads
