.jpg)
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
CRYSTA-APEX EX 1200R Standard CNC CMM | Mitutoyo by Muser
| Previous | 1 / 3 | Next |
Mitutoyo CRYSTA-APEX EX 1200R Standard CNC CMM
Description
The CRYSTA-Apex EX 1200R series is an advanced CNC CMM equipped with the REVO 5-axis scanning probe head. The 5-axis operation allows for faster probe movements and measurements.
Features
The 5-axis operation on the REVO-equipped Mitutoyo Crysta-Apex EX 1200 R CNC CMM reduces the time required for probe repositioning movements for faster measurements. This also facilitates access to complex workpieces, saving time during programming and measuring. The ultra-high speed 5-axis scanning greatly surpasses conventional 3-axis control, supporting high-speed sampling of up to 4,000 points per second. The internal implantation of laser sensing technology ensures high-accuracy measurement even with long styli.
- REVO 5-axis scanning probe head delivers ultra-high speed 5-axis scanning
- Reduces time required for probe repositioning movements and allows for flexible positioning
- 3D CAD modeling offers productive on-line or off-line programming
- Automatic probe changes with an optional module changer is supported
- Supports RSP2 for 5-axis scanning probe and SP25M type RSP3 probe for use of a cranked stylus
- Temperature compensation guarantees accuracy within the range of 16 to 26°C without a temp-controlled room
Technical Specifications
| Model | CRYSTA-Apex EX 121210R | CRYSTA-Apex EX 122010R | CRYSTA-Apex EX 123010R | |
| Measuring range | X axis | 1200 mm | ||
| Y axis | 1200 mm | 2000 mm | 3000 mm | |
| Z axis | 960 mm | |||
Note: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.
CRYSTA-Apex EX 1200R Series Accuracy (Unit: μm)
| Probe used |
Length measurement error*1 ISO 10360-2: 2009 |
| REVO + RSP2 + RSH250 | E0, MPE =2.3 + 3L/1000*2 |
| REVO + RSP3-3 + RSH3-3 | E0, MPE=2.5 + 3L/1000*2 |
*2 L = Measuring length (unit: mm)
Downloads
