.jpg)
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
ZXCON-CON1 Consistometer Standard 24cm | Endecotts by Muser
Endecotts ZXCON-CON1 Consistometer Standard 24cm
Description
The Consistometer is a low cost, durable, instrument for accurately checking laboratory or production samples against consistency, viscosity or flow rate standards.
It uses little bench space and is yet probably the simplest, most accurate method of conducting a variety of flow associated tests. It is already widely used in the chemical, paint, cosmetic and food processing industries.
The consistometer provides a single parameter for a variety of flow tests which can be carried out over any period under as near identical conditions as possible.
The Consistometer or Bostwick Consistometer is manufactured from 316 food grade stainless steel engraved with a series of precise graduations at 0.5 cm intervals.
To ensure accurate reproducibility, the instrument is levelled using the adjustment screws and spirit level.
It uses little bench space and is yet probably the simplest, most accurate method of conducting a variety of flow associated tests. It is already widely used in the chemical, paint, cosmetic and food processing industries.
The consistometer provides a single parameter for a variety of flow tests which can be carried out over any period under as near identical conditions as possible.
The Consistometer or Bostwick Consistometer is manufactured from 316 food grade stainless steel engraved with a series of precise graduations at 0.5 cm intervals.
To ensure accurate reproducibility, the instrument is levelled using the adjustment screws and spirit level.
Product Advantages
- Low cost
- Ease of use
- Suitable for a variety of tests
- Provides a consistent platform for test
- Requires up to 100 ml of sample
- 316 food grade stainless steel construction
- Engraved graduations for accurate results
- Leveling screws and spirit level enable accurate set up
Functional Principle
- A measured sample up to 100 ml, is placed in the reservoir behind the gate of the consistometer.
- The gate is released, by pressing the lock release lever - the spring action ensures it opens instantaneously.
- As the fluid flows down the instrument its progress can be accurately measured using the graduated scale. By comparing the flow rate to specified time periods the physical properties of the sample can be calculated.
Technical Data
| Application | Checking laboratory or production samples against consistency, viscosity or flow rate standards |
| Length | Standard version: 355 mm |
| Trough length | Standard version: 240 mm |
| Width | Standard version: 83 mm |
| Height | Standard version: 110 - 139 mm |
Downloads
