PCE Instruments PCE-CPC 100 Particle Counter     Features Real-time measurement from 0.3 μm to 10 μm Output in particles/28.3L or particles/m³ Visual and audible alarm when threshold value is exceeded Modbus RTU and MQTT via RS485 Real-time display of cleanroom class ISO 14644-1 Robust housing for wall mounting     Description   The state-of-the-art particle counter enables precise real-time measurement in the range from 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling is performed by an internal pump. When the particles pass the light source (laser), light scattering occurs; the scattered light is converted into an electrical signal (pulse) by a photoelectric transducer, and the larger the particles, the larger the pulse signal.   The particle counter offers not only a visual but also an audible alarm function. Threshold values can be set for each channel; as soon as the predefined threshold values are exceeded, the cleanroom particle counter issues a warning. The integration of Modbus and MQTT ensures seamless integration into existing networks and enables efficient data communication. The sampling time can be set from 1 to 10 min and the pause time from 1 to 1000 min.   With our real-time display of the cleanroom class according to ISO 14644-1, the particle counter always provides control over the cleanliness of the environment. This function makes it possible to continuously monitor the cleanliness level and ensure that the premises meet the required standards.     Technical Specifications   Particle   Measuring range   0 particles/28.3 l ... 1000000 particles/28.3 litres Measurement channel sizes   0.3, 0.5, 1.0, 5.0, 10 Counting efficiency   50 % @0.3 μm 100 % @≥0.5 μm (at 25±2 ℃, 50±10 % r.h.) Flow rate   28.3 l/min Temperature   Measuring range   -40 °C ... +125 °C Resolution   0.1 °C Accuracy   ±0.2 °C (within 5 ... 60 °C) Moisture relative   Measurement range   0 % ... 100 % Resolution   0.1 % Accuracy   ±2 % v.Mw. General technical data   Display type   Touch display Display size   3.5 inch Display refresh rate   1 x per second Interface   RS485, Ethernet Sensor   Laser scattered light Response time   8 s Menu language   English, Chinese Protection class (device)   IP30 Power supply   24 VDC, 5 A Plug type   Protective contact plug Weight   1495 g Depth   87 mm Other dimensions   Tube: inner diameter: 10 mm / length: approx. 3 m Operating conditions   0 ... 45 °C , 0 ... 95 % r.H Storage conditions   -20 ... 60 °C , 0 ... 95 % r.H     Delivery Scope 1 x particle counter PCE-CPC 100 1 x isokinetic probe 1 x hose approx. 3 m 1 x mains cable 1 x power supply unit 24 V / 5 A 1 x operating instructions   read more

Milkotronic Lactoscan Combo Ultrasonic Milk Analyzer     Description Combination of Lactoscan SCC and W Embedded Windows tablet Embedded printer Fast Autofocus High-end direct fluorescent, low magnification microscope with fast autofocus and cell counting software Fast, accurate, reliable somatic cells analysis of cow, sheep, goat, buffalo and human milk Possibility of reference analysis Detects subclinical and clinical mastitis Lowest cost per test of Somatic Cell Counts Test results within 20 to 60 seconds Store unlimited number of records in the database Automatic software update and Remote service Internet Cloud services E-mail and SMS support Wireless keypad and mouse     Key features User-friendly: simple in operation, maintenance, calibration and installation Very small quantity of milk required Low power consumption No use of hazardous chemicals One year full waranty Measuring accuracy adjustment can be done by the user RS 232 Interface     Technical Specifications   Parameter Measuring range Accuracy Fat 0,01– 45% ±0,06% Solids-non-fat (SNF) 3% – 40% ±0,15% Density 1000 – 1160 kg/m3 ±0,3kg/m3 Protein 2% – 15% ±0,15% Lactose 0,01% – 20% ±0,2% Added water 0% – 70% ±3 Milk sample temperature 5°C – 40 °C ±1% Freezing point –0,4°C — –0,7°C ±0,005% Salts 0,4% – 4% ±0,05% PH 0 – 14 ±0,05% Conductivity 2 – 14 [mS/cm] ±0,05% Kg From 0 – 150 kg ±0,10 kg Total solids 0 – 50% ±0,17%     Environmental Conditions Ambient air temperature — 10°C – 40°C (option 43 °C) Milk temperature — 1°C – 40°C Relative humidity — 30% – 80% Electrical Parameters: AC Power Supply voltage – 220V/110VDC Power Supply voltage – 12V to 14,2V Power Consumption – 30W max Mechanical Parameters: Dimensions (W x D x H) 290x300x330 mm Weight < 5 kg     Downloads Operation Manual User Guide     read more

Biorex Food Diagnostics BXEFB03A Chloramphenicol FAST ELISA   Chloramphenicol is a broad spectrum antibiotic which is predominantly active against the main pathogen gram negative bacteria occurring in a number of food producing animals. Chloramphenicol is an antibiotic not authorised for use in food-producing animals in the European Union. Antibiotic residues such as chloramphenicol in foods pose a serious threat to public health due to aplastic anaemia. Due to this risk the use of chloramphenicol is food producing animals is prohibited in many countries worldwide with zero tolerance limits being imposed. It is therefore essential that the presence of this drug is monitored in food products such as meat, milk, honey and seafood.     Technical Details   Cat Code. Method Assay Time Limit of Detection (LoD) Cross Reactivity BXEFB03A ELISA 96T 45mins Shrimp/Prawn: 0.025ppb Urine: 0.1ppb Milk: 0.1ppb Honey: 0.05ppb Tissue: 0.1ppb Feed: 0.1ppb Egg: 0.1ppb Serum: 0.2ppb Chloramphenicol 100%; Chloramphenicol Glucuronide >100%     Downloads Product Catalogue Seafood Analysis Honey Analysis     read more

PCE Instruments PCE-CTT 5 Torque Meter     Features Accuracy of 0.3% of the measuring range USB interface for software connection Different units can be set Samples can be clamped without tools Integrated printer Rubberized brackets     Description   The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. This measurement with the torque meter for drinking bottles is particularly important to find out whether the containers are properly closed. If the containers are not properly closed, the food they contain could rot prematurely, for example. Therefore, this measuring method with the torque meter for drinking bottles is particularly necessary in the food industry.   It doesn't matter whether the bottle torque meter is used in the laboratory or in production. The turntable of the torque meter for drinking bottles can hold samples with a diameter between 20 and 200 mm. A crank attached to the side of the torque meter for drinking bottles enables stepless and flexible adjustment of the transducer. Thanks to the crank, samples can be mounted quickly and easily.   Various functions are available for the analysis of the torque meter for drinking bottles. For example, the current measured values ​​can be displayed on the torque meter for drinking bottles. The peak value (PEAK) can also be displayed on the torque meter for drinking bottles.   A direct connection to a PC can be established via the USB interface on the torque meter for drinking bottles. The software can then be used to depict a graphical and tabular course of the measurement process from the torque meter for drinking bottles. The measurement data stored by the torque meter for drinking bottles can also be called up and processed using the software.   The recorded measurement data can be printed out at the touch of a button via the printer integrated on the side of the torque meter for drinking bottles. In order not to print all memory locations at the same time, the torque meter for drinking bottles offers the option of limiting the memory locations when printing.     Technical Specifications   Measuring range 5 Nm / 3.69 ft-lb Resolution 0.002 Nm / 0.0015 ft-lb Accuracy 0.3% of the measuring range Unit Nm, kgFcm, lbFin Direction of rotation Left and right direction of rotation Clamping pins / sample grips Rubberized Data memory For up to 100 measured values Interface USB Display LCD graphic display Power supply 230V / 110V Sample size 20 ... 200 mm / 0.8 ... 7.9 in, in diameter Sample weight max. 5 kg / 11 lb Ambient conditions 5 ... 45°C / 41 ... 113°F, 35 ... 65% r.H. Dimensions 280 x 210 x 200 mm / 11 x 8.3 x 7.9 in Weight Ca. 9 kg / 19 lbs     Delivery Scope 1 x Torque meter for drinking bottles PCE-CTT 5 1 x USB cable 1 x IEC cable 1 x Software 1 x M6 hexagon socket 1 x M5 hexagon socket 4 x Rubber feet 4 x Rubberized sample holders 1 x Instruction manual     Downloads Product Datasheet User Manual     read more

PCE Instruments PCE-CTT 10 Torque Meter   Features Accuracy of 0.3% of the measuring range USB interface for software connection Different units can be set Samples can be clamped without tools Integrated printer Rubberized brackets     Description   The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. This measurement with the torque meter for drinking bottles is particularly important to find out whether the containers are properly closed. If the containers are not properly closed, the food they contain could rot prematurely, for example. Therefore, this measuring method with the torque meter for drinking bottles is particularly necessary in the food industry.   It doesn't matter whether the bottle torque meter is used in the laboratory or in production. The turntable of the torque meter for drinking bottles can hold samples with a diameter between 20 and 200 mm. A crank attached to the side of the torque meter for drinking bottles enables stepless and flexible adjustment of the transducer. Thanks to the crank, samples can be mounted quickly and easily.   Various functions are available for the analysis of the torque meter for drinking bottles. For example, the current measured values ​​can be displayed on the torque meter for drinking bottles. The peak value (PEAK) can also be displayed on the torque meter for drinking bottles.   A direct connection to a PC can be established via the USB interface on the torque meter for drinking bottles. The software can then be used to depict a graphical and tabular course of the measurement process from the torque meter for drinking bottles. The measurement data stored by the torque meter for drinking bottles can also be called up and processed using the software.   The recorded measurement data can be printed out at the touch of a button via the printer integrated on the side of the torque meter for drinking bottles. In order not to print all memory locations at the same time, the torque meter for drinking bottles offers the option of limiting the memory locations when printing.     Technical Specifications   Measuring range 10 Nm / 7.4 ft-lb Resolution 0.005 Nm / 0.0037 ft-lb Accuracy 0.3% of the measuring range     Unit Nm, kgFcm, lbFin Direction of rotation Left and right direction of rotation Clamping pins / sample grips Rubberized Data memory For up to 100 measured values Interface USB Display LCD graphic display Power supply 230V / 110V Sample size 20 ... 200 mm / 0.8 ... 7.9 in, in diameter Sample weight max. 5 kg / 11 lb Ambient conditions 5 ... 45°C / 41 ... 113°F, 35 ... 65 % r.H. Dimensions 280 x 210 x 200 mm / 11 x 8.3 x 7.9 in Weight Ca. 9 kg / 19 lbs     Delivery Scope 1 x Torque meter for drinking bottles PCE-CTT 10 1 x USB cable 1 x IEC cable 1 x Software 1 x M6 hexagon socket 1 x M5 hexagon socket 4 x Rubber feet 4 x Rubberized sample holders 1 x Instruction manual     Downloads Product Datasheet User Manual     read more

Biorex Food Diagnostics BXEFB43A AHD FAST ELISA     Antibiotic residues in foods pose a serious threat to public health. The Nitrofuran class of broad spectrum antibiotics (Furaltadone, Furazolidone, Nitrofurantoin and Nitrofurazone) are commonly used in food-producing animals. Their potential for harmful effects on human health, specifically carcinogenicity, has led to bans on their use in food producing animals in many countries including the US, Canada, and the EU. These countries have also imposed bans on all imported foods containing Nitrofuran residues. The monitoring of water sources and food products, such as meat, for antibiotic residues is necessary to ascertain that these compounds are not misused and do not present a danger to human and animal health.   The detection of nitrofurans themselves has proven challenging, as the drugs are rapidly metabolised after ingestion. The protein bound metabolites which are formed, however, persist in edible tissue for a considerable amount of time after treatment. AHD (1-aminohydantoin), the metabolite moiety derived from Nitrofurantoin, is not degraded by common cooking techniques and can be released from tissue under mildly acidic conditions, making it ideal for monitoring and detection in edible tissue.     Technical Details   Cat Code. Method Assay Time Limit of Detection (LoD) Cross Reactivity BXEFB43A ELISA 96T 45mins Fish/ Shrimp: 0.08ppb Aqueous Buffer: 0.03ppb Meat Tissue: 0.08ppb Honey: 0.5ppb 2.NP.AHD 100%     Downloads Product Catalogue Seafood Analysis Honey Analysis     read more

Biorex Food Diagnostics Streptomycin FAST ELISA   Streptomycin is an aminoglycoside antibiotic elaborated by the bacteria Streptomyces. Streptomycin and dihydrostreptomycin are both closely related in structure, pharmacokinetics and antimicrobial activity. Both drugs are used to treat bacterial infections in cattle, pigs, sheep and poultry. Streptomycin is not permitted in European apiculture however is permitted in the USA for treatment of American foulbrood outbreaks (4 weeks withdrawal period required before honey can be used).   No antibiotics are permitted in honey therefore accurate tests such as this are required to ensure that this residue not pass into the food chain. The presence of antibiotics in honey can lead to allergic reaction in humans and increase antibiotic resistance.     Technical Details   Cat Code. Method Assay Time Limit of Detection (LoD) Cross Reactivity BXEFB37A ELISA 96T 60mins Honey: 5ppb Streptomycin 100% Dihydrostreptomycin 129%     Downloads Product Catalogue Honey Analysis     read more

PCE Instruments PCE-LDC 20 Ultrasonic Leak Detector     Features Leak detection Leakage assessment Various attachments Battery-operated handheld device Colour touch display Wireless headphones     Description   The ultrasonic leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should. Detecting leaks at an early stage can save up to 30% in energy costs.   Small leaks in pressurised systems generate ultrasonic sounds that are inaudible to humans. By using an ultrasonic microphone, the locating device can measure frequencies that exceed the perception limit of human hearing. The ultrasonic leak detector's high-quality measurement electronics convert the recorded ultrasonic sounds into sounds that the user can hear, which the ultrasonic leak detector transmits via Bluetooth or the 3.5 mm jack plug.   With this ultrasonic leak detector, the user can document even the smallest leaks, the ultrasonic leak detector can photograph the leak and record a voice memo. The device also provides information on how much compressed air or gas is escaping through the leak. The ultrasonic leak detector therefore enables precise and efficient leak detection and assessment.     Technical Data   Measurement functions   MAX, ALARM Units   bar, psi, MPa, l/min, m³/h, cfm Frequency   38 ... 42 kHz Display type   LC Touch Display Display size   3.5 inch Display refresh rate   1 x per second Measurement rate   1 Hz Memory medium   Internal memory Storage capacity   1 GB Microphone type   Electret condenser Other functions   Leakage rating Interface   USB-C, 3.5 mm jack, Bluetooth Sensor   Ultrasonic Measuring medium   Non-explosive gases, air, refrigerants Camera resolution   5 megapixels Operating time   6 h Automatic switch-off adjustable   0 ... 60 min. Laser   640 ... 660 nm wavelength, < 1.0 mW output power Housing   ABS Menu language   German, English, French, Spanish, Portuguese, Turkish, Polish, Chinese, Japanese, Korean, Czech Protection class (device)   IP30 Power supply   5V DC 3 A (via USB-C) Weight   432 g / 0.95 lb Other weights   Sound horn: 38.5 g / 0.08 lb Acoustic horn + tip: 20.5 g / 0.04 lb Dimensions (L x W x H)   230 x 100 x 62 mm Other dimensions   Sound horn : L 130 Ø 60 mm Alignment tube + tip : L 190 Ø 14 mm, opening Ø 1.5 mm Operating conditions   0 ... 40 °C , 0 ... 80 % r.H Storage conditions   -10 ... 50 °C , 0 ... 90 % r.H     Delivery Scope 1x PCE-LDC 20 ultrasonic leak detector 1x calibration certificate 1x software 1x USB-C cable 1x wireless headphones 1x micro USB cable 1x 5 V power supply unit with adapters 1x operating instructions     read more