.jpg)
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Anton Paar CLA 5 | Cleveland Flash & Fire Point Tester
| Previous | 1 / 5 | Next |
Anton Paar Cleveland Flash & Fire Point Tester: CLA 5
- The automatic Cleveland Open-Cup (COC) measures and describes the properties of a sample in response to heat and a test flame under controlled conditions. The flash point measures the tendency to form a flammable mixture with air while the fire point indicates the tendency of sustained burning.
- CLA 5 is suitable for flash and fire point applications of lubricants or bituminous material.
Key Features
Benefits at a Glance
- Memory for 1000 tests, 20 operators, 100 sample names, 21 test methods
- Statistical analysis (Min, Max, Mean, Repeatability)
- Measures flash points of silicone samples without any problems
- Automatically lights up the test flame, relights it by an electric igniter and suppresses the gas source at the end of the test
Convenient Operation
- Test initiation by pre-installed standard test methods and ability to customize methods by 10 user-defined programs.
- Alert messages for out-of-spec results
- Pt100 sample temperature probe calibration either by dynamic calibration against certified ASTM thermometer or by correction table with 21 calibration points.
- Calibration protocol printout
- 5.7” color graphics display shows real-time measurement
- Menu navigation by jog shuttle system with easy turn-and-push operation and color-coded LED indication for each operation mode
- Data handling via USB stick for import into MS Excel® or to LIMS
Customized User Flexibility
- PC-software FPPNet (optional) for convenient remote handling and test data storage
- Automatic skin removal kit (optional)
- Draft deflector (optional)
- Stainless steel sample temperature probe Pt100 (optional)
Technical Specifications
| Application range | up to 400 °C (°C/°F selectable) |
| Ignition | Gas |
| Heating | According to methods, programmable and pre-heat mode |
|
Detection of flash and fire point |
Ionization detector |
| Sample temperature | Pt100 glass probe |
| Barometric pressure correction | Automatic correction |
| Safety | Overheat protection, automatic shut-off |
| Interfaces | 3x USB, 1x RS232, LAN |
| Gas supply | 50 mbar of propane or butane |
| Power supply | 115 V/230 V, 50 Hz/60 Hz, 600 W |
| Dimensions | 230 mm x 390 mm x 460 mm (W x D x H) |
| Weight | 12 kg |
Standard Methods
- ASTM D92
- ISO 2592
- JIS K 2265-4
- AASHTO T48
- FTM 791-1103
- IP 36
- GOST 4333
Downloads
